Charlestowne Woodturners

A club for those turning, or wanting to learn woodturning in the Charleston SC area.
The Charlestowne Woodturners are meeting at JMO Woodworks, 70 Romney St., Charleston, SC 29403. On the 3rd Wednesday night of each month from 6:30pm-9:00pm.
 
HomeHome  CalendarCalendar  GalleryGallery  FAQFAQ  SearchSearch  RegisterRegister  Log in  

Charlestowne Woodturners  :: Woodturning Gerneral :: FinishingShare | 
 

 Pens & CA finish

Go down 
AuthorMessage
Duane D

Duane D

Number of posts : 30
Age : 68
Registration date : 2014-08-22

PostSubject: Pens & CA finish   Fri Dec 19, 2014 10:01 am
After finishing a pen with a CA finish is there a way to "break" it free from the bushings without cracking or pealing off some of the finish on the end of the pen? The bushings seem to get glued to the pen blank & last night when I applied a little pressure to break it free, the finish at the end of the pen pealed off in a small spot. I'll be sanding that off tonight & trying to finish it again.
Back to top Go down
Dave W

Dave W

Number of posts : 290
Age : 52
Registration date : 2008-11-20

PostSubject: Re: Pens & CA finish   Sat Dec 20, 2014 6:28 pm
Duane,

You might want to give these a try, or you could make some yourself.

http://www.woodcraft.com/Product/158490/hold-fast-nonstick-bushings-for-ca-pen-finishing.aspx

_________________
Life's short, turn fast!

Dave
Back to top Go down
Duane D

Duane D

Number of posts : 30
Age : 68
Registration date : 2014-08-22

PostSubject: Re: Pens & CA finish   Mon Dec 22, 2014 8:02 am
Looks like that will work. Thanks.
Back to top Go down
Sponsored content




PostSubject: Re: Pens & CA finish   
Back to top Go down
 
Pens & CA finish
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Charlestowne Woodturners  :: Woodturning Gerneral :: Finishing-
Jump to: